Reply to "Clutch advice needed"

noquarterMember

Just after I posted this, I looked in Pantera Technical Information, 16-02-03. There it says to discard the stop bolt and adjust the pushrod. Actually I think there's a word missing. It says in the text "The pedal free travel should be 1/4 to 7/16 inch, equivalent to 0.102 to 0.106 inch [?] of withdrawal lever clearance". And in point 5. it says "Adjust length of push rod to give 3/4 inch of free play and clutch pedal retaining locknut".

1/4 to 7/16 is equal to 0.25 to 0.44. And 3/4 is equal to 0.75.

Can somebody explain, I've now read 3 different methods in the official Pantera publication?

Can the pedal be adjusted at the master cylinder, and if yes, what is the right measure so it doesn't bottom out?

11/7/076:38 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...