Reply to "Clutch Master and Shackle"

danieljonesMember

I went through the box of used parts from the previous owner and found the
original clutch master cylinder. It still had the original pushrod which
is approximately twice the length of the shackle or about 60mm (2.36").
Also there was a new much longer pushrod, approximately 3 1/2 inches.
I assume the CNC master came with a short and a long pushrod and the long
pushrod is for a Pantera without the clutch effort reduction kit.

Dan Jones

6/12/089:14 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...