Reply to "Clutch Master Cylinder"

sickcatMember

I bought from wilkenson and was not happy.
Here's some info I have collected on the stock part.

Clutch Master - D-Bonaldi C ITALY 5998 FM2

Clutch Master mount bolts = M8 x 1.25 x 1 ¼” or 30mm
Rebuild kit BECK ARNLEY 071-5771
NAPA 255 $19.09
EIS C7679
Bore, .750”
Boot, 3’ long 1.235” large OD + .590” small OD

Next time I replace I will probably go with Pantera East. If I remember the kits were not availible.
If you take these apart you will only see that the working parts are o'rings, you would be well served to go with viton o'rings,the parts you really need are the boot, tank and lid. real poor from the vendor i choose
This fellow rebuilds them with stainless sleeves,

Vince Sr. at CH Topping in Long Beach,CA. Phone is 562-432-0901.
REBUILDS SLAVES,

Good luck, Mark

Attachments

Hide

Images (1)

10/17/089:34 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...