clutch problems

Guest

I replaced my clutch master cylinder with the aftermarket pim cnc version, and the long throw slave unit two years ago. I have bleed the system several times. The problem is that the car starts to walk or move after the clutch is pedal is held at a stop light for awhile. At first it doesn't do it at all, but then gets worse. I just rebuilt the transaxle, it shifts fine, and the pedal is pretty firm. I am thinking that the clutch master cylinder is bleeding through, there is no fluid loss. Any ideas?

7/1/066:43 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...