Reply to "clutch Release bearing"

Mark Savage (Guest)

Centerforce lists their DF021057S for the Pantera application. It requires a flywheel with a 5.0 mustang style bolt pattern and uses the standard pantera release bearing. The only thing "special" is that they drilled the pressure plate holes for larger bolts.
I used the DF700000. It is the old 11" ford diaphram style. It requires a .400 shorter bearing. You can cut that much off your bearing carrier or as I did, use Mcleod's adjustable bearing #16525 and remove both spacer rings.

regards...Mark #3461

12/26/075:51 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...