Reply to "Coil, cap and rotor"

daxters75Member

Installed new coil and plug wires. Did the plugs and gaped them at .44 then crossed my fingers and it started right up. Runs better, little smoother but still rich. Have some carb adjusting to do now that I finished the other things. Its an edelbrock with the 2 adusting screws on the back. Last time I tried it they did nothing which made me look at the electrical first. Thats how I found stuck dist, bad plugs, bad coil. Was too wet on the street today or I would have taken it for a short test drive.

4/11/125:27 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...