Reply to "Compcams Teflon Valve Stem Seals ?"

Soulcollector (Guest)

Hehe...Thx.

I believe that it was freshwater that they flushed the deck with.. they were walking around with hoses when i drove on to the deck..

I insisted on going "flat-on" and not on the 45deg ramp and get stuck on top

Isn't there anyone that have used the teflon seals that could give me some hints on the installation procedure.. how large the diameter of the valve-towers should be etc. The thing the puzzels me is that the towers are conical and i have a hard time believing that the seals will stay in place to long. however when i tried installing a rubber seal i couldn't get the inner spring in place so.. the teflons have to do it. douh ! sucks not knowing what to do and i have already trashed a cam so this is my 2nd rebuild would very much like to avoid a no3.

Cheers !

Check out my main camaro site too.
http://www.soulcollector.se

12/28/043:35 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...