Hi Steve!
I was Talking about the Ford Head Bolts.
As in The 'Boss 351' Spec.
They Can Take 125 Ft/Lbs!!
Then the Tech advise for Their studs (1/2" Dia.) Was 110 Ft/Lbs Using Their Special Lubricant. I Think it's Just Molybdenum-Disulfide!
130 Ft/Lbs Using 30w Motor Oil.
I used the Latter.
I was also worried I would Strip the Nuts, But they Took It No Problem! Remember we're talking .500" Dia. Not the Smaller 7/16".
The Advantage of The FINE Threads Over COURSE Threads, In 'Clamping Force' is a 40% Increase!
Plus, When using Studs the Entire Assembly is Just More Rigid; Because Bolts Never Fill the Tapped Hole, Completely to the Bottom!!
Real Nice to Hear From You, Steve!
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.