Reply to "cooling plumbing coating"

fordgtMember

I had my tanks jet hot coated, bad idea. The process was hot enough that it caused the neck to become "de-soldered" off the tank. In order to re-solder it I would have to use heat which would have discolored the tank. Replaced it with a stainless tank. The other tank worked okay until it rusted from the inside out, replaced it with a stainless. No more worries.
Powder coat is not as hot as jet hot process, but it has to be sprayed, then baked. Don't think you could spray the inside top. You would need to do inside and out at the same time I believe. Go stainless, be done.

12/8/1410:22 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...