quote:I am trying to determine the exact (close) axle centerline location relative to the body/chassis so we can properly fit the flares front-to-back. Does anyone here know a body/chassis hard point to measure from and what the dimensions from that hard point to the axle centerlines should be?
Sounds like a good approach, but would be best to reassemble the rear suspension and position the flares with the wheels and tires mounted. There are slight variances in the chassis from side to side which sometimes result in the wheels sitting in different positions from side to side. The next time you go to an Italian car show, look at the flared Panteras. You'll immediately spot the cars that had their flares mounted without the wheels/tires in place - the wheels are not centered in the flare! They give the cars that "been hit and poorly repaired" look.