Coyote is all wired up and idles! Decided to Go with HP computer to be able to have L&M cams and 8 stack tunable.
I placed I wired the fuel pump and Tach adapter from Pantera electronics through the computer.
big thanks to Jon Haas at Pantera electronics for helping me through this. Tact adapter is perfect, and was super easy to install.
We are going to tune it this week, hopefully.
The fiberglass deck lid from PIM wasn’t a slam dunk. I had to remove the weatherstripping and adjust the rain gutter rails, where the hinge mounts to get it to slide forward and latch. We have spent hours trying to get a good alignment with chims and wrap our brains around how to not grind on the car pinch welds in order to get it to fit. The idea was to use this deck lid and be able to place the other deck light on if I get rid of the 8 stack. Haven’t adjusted/cut/ground the lid at all bc might have to return it😥 and cut the flawless stock one.
Does anybody have any experience/ideas how to get the “wing part”/rounded forward corner as it turns into the roof line higher without bodywork? Both sides are sub 1/4 inch. See pics. Thanks!
