The torque for the 7/16-20 bolts that hold the adaptor to the ZF flange and the adaptor to the stub axle flange are 80 ft/lbs. Since it is almost impossible to get a torque wrench on those bolts, tighten with a boxed end wrench and an extension very tight. Also use a drop of lock-tight on each bolt.
The torque for the 3/8-24 bolts is 45 ft/lbs. Those are the bolts that hold the CV to the adaptors. We also use a drop of lock-tight on each bolt.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.