Reply to "dickruzzindesign@aol.com"

Hi Dick,

Sorry I am so long responding. I am working on my barn and a Mangusta and dont have much time for anything else!

If you have changed your trailing links to L/H thread on one end this will make it much quicker to adjust. The only down side to this is you cant stop the bar/link from turning while you are tightening up the nuts without gouging the paint as you try to hold it with Vise-grips or pipe wrench!

You do understand me correctly, the top trailing link will get shorter and the bottom longer. The bottom link is only just long enough so make sure you have enough rod end in the tube when you have finished.

Mounting a laser on the hub and pointing it forward onto a wall will not work because the ark you see on the wall will include the ark of your A arms. This is why you have to shine it into a mirror and then back onto a piece of board that is attached to the laser it's self. Then you only record toe change as the in and out movement of the A arm ark is not recorded because of the mirror.

Please send me an email Johnnyrwoods@aol.com and I can send you pics of the laser jig I made and how I did the top link Rose joint mod. Resizing and posting pics on this forum takes too long. If I could upload any size picture and the forum automatically resize it to 200KB it would be SO much better (like uploading pics to ebay).

Also call me anytime, it would be good to talk. +44 781 718 7333

Johnny