Reply to "Disassembly and Reassembly ZF"

tyler5Member

i appreciate the feed back however. Maybe you guys are not understanding my question. I have the trans completely disassembled and the new 4th gear set installed. ( the -1 had a very short 3-4 shift. I replaced it with the same ratio as the -2. .846 Gear stacks are reassembled. I need to remove the diff. carrier from the housing and it will not come out. ( yes side covers are removed). The only way i see possible is to pull at least one side diff brg. to allow enough room to slip past the housing. then i can change the ring gear.

10/15/224:47 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...