Skip to main content

DOAE 4v heads

I have started some enginework on #6287.
The stock open chamber heads has the usual mix of 4V channels and 2v valves.(D3ZE)

Today i was "out shopping" and bought a set of 4V heads for the 351C. The heads has a DOAE casting mark AND is of the open chamber design. The heads has the big ports and the big valves.

I have not measured the CC- but the heads has been milled and has been used with pistons from a 351 BOSS. This worked nice until the use of NOS blow the engine up... Anyway the heads survived Smiler

Is this a 1971 CJ head? Or what is it?
Last edited {1}
Original Post
×
×
×
×