Reply to "Door windows & regulators......PITA!!!"

69gooseMember

Hi Steve, I have just done this job with my Goose as part of its body/interior restoration. We had the door frame out so made it easier to get the bailey channel in. The channel that I found fitted perfectly was the same as fits my Testarossa. The channel stays in the frame without any glue etc as it should. The quarter window is also held in place by bailey channel on the front and bottom surfaces and previously was covered in black mastic. I had some trouble fitting one of the exterior door frame rubbers as when the frames were re chromed there was a little web type build up of chrome in the corner which did not allow the seal to fit right. Some detail work with the dremmel soon got it correct. Just about to get the car back on the road so will post a few shots. Mike

3/25/161:41 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...