Thanks Doug,
Yeh the clutch is the one from PI. The PP Disk and Heavy duty TO Bearing. The PP has the 3 fingers. Every thing is working good now. I did not have enough gap between the TO Bearing and the PP. At idle there was no noise but as the RPM got higher I could hear like a needle bearing noise (which I thought was the needle bearing in my rockers - wrong) then the noise would go away when the RPM went back to idle. I increased the gap between the TO bearing and the PP and the noise went away. I'm just hoping that I did not wear it out prematurely. The entire clutch only has about 600 or so miles on it.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.