The length of the master cylinder pushrod is somewhat critical, i.e. if it is too long, it will be on the wrong side of center and you won't be able to depress the clutch pedal.
The cast bell crank is made of soft material and will wear quickly if those three pivot points aren't periodically lubricated. Those pivot holes can be machined to accept small needle roller bearings.
John
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.