I looked into putting the TFS intake in my 72. I haven't actually seen the intake in person, but TFS was kind enough to send me a 3d model of it for my electronic mock-up. My biggest concern about the intake was the possible interference between the intake and the deck lid. It looks as if with about 1/4" of machining between the upper and lower intake manifold, the TFS intake should fit. I must note that I did not check for any possible interferences between the intake manifold and the firewall.
The intake will sit above the engine cover about 1-3/4 inches in the intake's highest section. The inlet side of the intake must face the passenger side as well because of the possibility of the the deck lid clearance. (the intake is not symmetric)
Since my car already had the engine cover cutout for an oval air cleaner, I've decided to skip the TFS R-series intake and go with the TFS Track Heat and have it modified for fuel injection. The TFS Box R intake would have met my power goals better, but it's just too big.
Attachments
Images (1)
