quote:Originally posted by David_Nunn:quote:Originally posted by JFB #05177:
David...
Do you recall with the 4 port if the "slide" provided a linear amount of heat control or was it more of a curve due to the mixing at 1/2 open/closed positions.
The potentiometer that controls the 4 port electronic heater control valve is a 5K Ohm, linear taper pot. The 2 port valve uses a 10K Ohm, linear taper pot.
When I did mine I measured the included potentiometer and it was a 0-4.7Kohm. The EZGO setup has a 5Kohm potentiometer which was close enough especially since it is 300ohms over. Works great.
Steve