electrical problem

Guest

I have disconnected a wire that I cannot identify.

In the process of replacing the bulbs in the console...

All was well until it was time to do the speedo. The lamp came out OK, I had a real hard time getting it back in to the socket. Once it was seated again I had no lights in the dash, brake lights, turn indicators...I replaced teh fuse, no difference. I now see a red wire with a female spade connector on it. I placed a meter on the wire and it does show voltage when I rock the light switch to positions 2 or 3. I do not a have a wiring diagram on the car yet. It is a 1972 pre L (3988). I need to figure this out before my journey to laguna seca this weekend, otherwise I am going to have to scrap the trip.

I you have information or ideas. maybe a wiring diagram I can take a look at? Please call me 925 787 0023 . I am Martinez, CA.

Thank you all in advance!

Greg

12/25/012:34 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...