quote:Originally posted by jb1490:
Doug,
The dash mounted brake warning light wires should be either gray (+12) and pink, or white (+12) and black.
Do you need wiring info for the emergency flasher or the hazard warning switch? If the flasher, is it a 3-wire flasher or a 4-wire flasher? If the switch, early or late, or are you replacing an early switch with a replacement (late) switch? Let me know exactly what it is that you need.
John
On the brake warning lights I have two grey and two white with black stripes coming to the light socket.
So you have just identified that lamp as the brake warning light. That helps.
I'm switching over from a dual pod to a single pod and doing some updating at the same time. Since this is an entirely new dash, I have the option of eliminating stuff, adding, or modernizing with led's etc, so it isn't really a plug and play situation at all.
The dual pod had two warning lamps on the dash. One was the brakes. What was the other one for?
I'm switching those two over to 5mm leds in micro black holders.
I need the diagram for the Hazard flasher. I did make a diagram before I pulled it out but lost that sheet.
I smoked the wiring to this switch before. Don't want that to happen again.
Can't make hide nor hair of the wiring diagram I got from Hall.
It's for my '73. I presume it is a late model switch.
It's marked SAE QC72 DKS E