Reply to "Engine bay paint options...?"

4nhotrodHe who dies with the most toys is dead

I found that a solid scraper (1 1/2") with a sharp edge worked well when heated with a heat gun. Too much heat would make it gummy and sticky. Too little heat would make it hard to remove. At the right temp, it would shave right off like cheese. Then I would use gasoline (applied with a spray bottle) and a green dishpan scrub pad to remove the residual stuff.
Keep your cigarettes at least 8" away at this point.
Will

8/16/106:59 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...