Reply to "Engine dolly plans??"

Larry, if you just want a Ford Engine Dolly to hold your 351c without the ZF, they're all over eBay for $35 free shipping. Just search "ford engine dolly" or "ford engine stand". I have a couple and have had to do a little filing on them because my aftermarket blocks have some webbing in the engine mount area that C's don't have but you'd be hard pressed to buy just the casters delivered for $35.

http://www.ebay.com/sch/i.html...gine+dolley&_sacat=0

If you want to keep your ZF attached, I used this style, for my long block/zf mock up installed casters and just made a single wheel caster support for the ZF that picked up the rear mounting holes.

http://www.ebay.com/itm/MotorF...251671910253&vxp=mtr

Hard to see why 2-piece cost more than the other style (made in China I suppose) but hard to justify making anything for $35. The rear caster support was just a piece of 1/8" thick 2" wide steel I bent up with a hammer in my vice and used a studded caster I had laying around.

Best,
Kelly