Engine performance

Donny DotsonMember

I just recently rebuilt my engine by resleeveing my block, running a standard set of some TRW dish pistons (9 1/2 to 1), reworking the closed chamber heads, a Perfomer Intake, .56 lift (intake and exhaust) with 110 separation reground cam from Scnider here in San Diego and a Holley 750. I took it over to the Dyno to test before installation. After cam brake-in we did several pulls and the best it did was 350 HP @5200 RPM. Is this is good as it gets? Was I expecting to much?

11/20/213:10 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...