Reply to "engine will not start"

72panterasteveMember

I am still having problems with the car not starting. No spark. Bought a brand new 6al box (6425), wired correctly, good grounds, blaster 3 coil, was told the ignition switch could be the problem so I cleaned it and tested it, tach adaptor (8920), and still no go.

It had a relay installed from the ignition circuit so I bought another one, tried it and no difference, then by-passed the relay, still no difference.

When I installed the new box it fired right up and I drove it for about 2 hours, parked it, and then the same problem - it will not fire up........

The LED on the new box blinks 5 times when power is supplied (I am told it is nothing to worry about as it is the rev limiter). The LED does not stay on with the power supplied to the unit.
Has me baffled.

Any suggestions?

Thanks,
Steve

1/4/143:42 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...