Here is just a few things I have done with the combination Brake, roller and cutter from HF:
Made these tanks from aluminum. Round tank was cut/rolled, square tank was cut, bent in 2 pieces, and of course cut, bent and rolled the brackets for the round tank:
http://www.rc-tech.net/MGB/homestretch/ctank.jpg
http://www.rc-tech.net/MGB/homestretch/of.jpg
Cut, and curved all 3 pieces in the nose of the fender including the round part of the bucket. The nose is all new metal:
Cut bent metal and welded in to make room for Camero Trans in MGB:
http://www.rc-tech.net/MGB/tunnel/tunfin.jpg
http://www.rc-tech.net/MGB/tunnel/tunfin2.jpg
Several body pieces cut and bent to shape. Door pannels, a quarter panel, the rear round pices curved and welded in bellow the tail lights. The list goes on and on all from the HF tool.
Gary
http://www.rc-tech.net/MGB/prep2/lfen.jpg
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.