Last one for tonite....
RH hose in place, Water Valve in place.
I had to be careful of the wire end of the control cable. It liked to get hung up on the top of the LH hose! I did not add the bent wire end...it was there already...just had to bend it out of the way slightly.
Getting to that top fitting on the water valve was a beeeyatch!!!! Hex on the valve body is 19mm (3/4") but the hex on the nut was 15/16" ish!!! Talk about 10lbs of wrenches on a 5lb nut!!!
Hopefully this job will last the lifetime of this ownership!!!
S
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.