Reply to "Erica needs to get hosed....."

mangustaMember

AHAH!!!!

Hope you're all full of deviled eggs, sugary eggs, and yellow chicks and bunnies!!!

Stupid simplicity strikes again!!!!!

What is R & L at the front of the tunnel....is NOT R & L at the rear of the tunnel!!!

The two metal tubes start out side by side, then go top to bottom down the side of the tunnel and exit crossed!!! My bad! No drawing from how I started....!

Today, I took all of the heater hoses off at the rear of the tunnel and confirmed no crap blocking flow. Got a little....but not very much. Flushed the core with water....got flow!

SO, filled it all back up again, fired it up....and the "non valved" hose/tube at the heater core was starting to heat up first!!! Wrongo! Hoses are crossed!

Now I need to let the thing cool down so I don't scald myself when I attempt to make hoses fit which have been beautifully trimmed and manicured, dressed, sent to prom.....but the wrong prom!

It's always something....! DeT strikes again!

Ciao!
Steve

4/1/185:49 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...