Reply to "exhaust pipes and mufflers"

Terry M (Guest)

I run Headman headers with three chamber flowmasters. I had the tubes built from the collector back at the shop while on the car. The flowmasters needed to have one corner cut to clear the tires. They are a little loud too but you can put a tube about 7 inchs long down one side of the muffler to drop the sound some. Make sure the tips are back far enough so you don't melt anything. The person that did the work has a Pantera. It takes patience, but it can be done.

[This message has been edited by Terry M (edited 08-21-2003).]

8/21/034:29 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...