Reply to "extended rear upper control arms"

A -arms Sold!
from the interest i wish i had several sets!
i am a capable fabricator , have been in the automotive restoration business for 30+ years.i have built many race cars & suspension systems.
i am currently working on a m6bgt mclaren [montage] project for a cutomer and have converted it from v6 citation to a ls4/mendeola transaxle w /c5 corvette upper arms and uprights with a fabricated lower arm 2'' narrower .i machined the ball joint socket,built a simple fixture using the stock c5 arm,to keep the correct ball joint angle /coil over mount and inner bushings fitted the tubing and tig welded it up. i built the rear half of the frame in jig w/suspension pickup points, then attached it to the existing frame at the firewall/rollbar.
if more of the pantera community need extended a-arms i will build a fixture and extend your stock a arms for $ 100+ shipping. so to speak '' a group- buy''.
if somebody out there can tell me how to make my photos 'smaller' i will post photos of the project and the a- arms i created. or send a note to my email ; MarkIVj7@aol.com
i am looking forward to your input!
thanks
wade