Hi, I am in process of collecting parts/making plans to convert my car from single carburetor to IR 8 stack fuel injection setup.
What are recommended fuel pump/filter/pressure regulators that people use; it should be good for about 600hp, combined road and track use.
As my car is a early '71 with aluminum tank I am not sure if this tank features the drain plug in the bottom that can be used as a fuel outlet and than use the original outlet in the top for the return line?
Unfortunately I do not have access to the car for a while so can not have a look to check this.
In case there is no drain plug to use as outlet available I was wondering if someone used following submerged pump kit; it looks as well designed kit and I think it should fit if new hole is made on the top of the tank next to the fuel level sender opening: http://www.summitracing.com/parts/aei-18310/overview/
If it is better/easier to go with outside one was thinking about following:
http://www.summitracing.com/parts/aei-11101/overview/
Thanks for any suggestions, Robert
Original Post