Reply to "FINALLY FINISHED THIS PROJECT"

Hi Brooke,

The mirror housings are the ‘79 - ‘83 Dodge Colt units that the vendors sold back-in-the-day. They were on 2511 at time of purchase, some sort of epoxy used to attach to the glass. Then a thin piece of painted metal is attached inside to cover the epoxy from view. Some similar epoxy mountings on other Panteras have found etched/scratched glass underneath (to improve adhesion) when removed, others seem to have worked fine on good, well cleaned glass.

Wiring is a small diameter cable (the LED’s draw no currrent) that exit the mirror housing bottom right next to the rubber window gasket, tuck in the gasket and into the door interior, then travel with the other wiring to the connection point under the dash at the emergency blinker switch. About an inch of cable shows, but it is black like everything else, on the bottom, and only seen if you get down and look for it.

And by the way, have you installed the GT5 lights you bought from me a while back? How’d it go?

Larry