Reply to "Flashers / Turn Signal Don't Work... Any Electrical Experts?"

rockyMember

I had two more questions on both wiring and flashers. I appreciate any help....

Question 1: How does the flasher really work? It seems like power is applied to the Flasher when the key is on, and that the flasher actually "flashes" when either the Hazard Switch or the Turn Signal applies a load (the appropriate bulb filaments to ground) on the OUTPUT of the flasher. It does not seem like the power is applied to the flasher unit when the blinker is turned on...Is this right?

Question 2: When doing an ATO Fuzebox Conversion... Do people cut / reattatch the terminals that mate to the spade terminals on the fuse box? Or do they just clean up the terminals and plug them into the new fuzebox with no change?

Thanks -

Rocky

11/1/127:43 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...