Reply to "Flashers / Turn Signal Don't Work... Any Electrical Experts?"

Sounds like the problem may be at the fuse panel connection.

For the backup lights, check for +12v on the green wire at the backup light switch (key in the run position). If no power there, then check the green wire at the nylon connector by the coolant tanks. Do this check with the nylon connector connected, and insert the test probe into the back of the nylon connector on the firewall side of the connector. If no power there, then check the green wire at fuse #12.

If there is no power in the first two tests (backup light switch and nylon connector), repeat the test(s) with the parking lights on.

If you (or anyone else) find that the backup lights only come on when the parking lights (or headlights) are on (shifter in reverse), then there will be a small green wire connected to fuse #3 (sometimes fuse #4). If you want to have the backup lights come on whenever the shifter is in reverse (and key on), you can move this green wire to any open terminal on fuse #10, 11, or 12. As an FYI, fuse #10 is the first "click" of the ignition, and fuses #11 & 12 are on the second click.

John