Reply to "Flashers / Turn Signal Don't Work... Any Electrical Experts?"

rockyMember

CLOSEOUT: Bad Hazard Switch.....

I finally figured out what you guys were trying to tell me.

My Hazard switch is bad on the INPUT power side - between (pins 30 (Green Wire) and 15 (Red Wire)) and Pin 49 (Yellow Wire). The rest of the switch is good.

I proved this to myself by pulling apart the Nylon Connector, and jumpering power directly from the Green with to the flasher (a different Pin 49), and the Red wire and the flasher.

In both cases everything worked as expected when (Green) Flasher Button Pushed, and (Red) Turn Signal activated with Ignition in RUN position.

Thanks, guys (esp. John). I just didn't get it that the Yellow wire is an OUTPUT, coming through the switch, and then a lot of stuff goes BACK through the switch.

Crazy!

Rocky

2/2/134:36 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...