Reply to "Ford aluminum brake master cylinder"

tsoloMember

First I set the length of the pushrod long then mounted the MC but did not tighten the bolts. The bolts only hold the MC in place. Then using feeler gauges top and bottom (it takes 2 sets) I measured the clearance between the MC and the adapter. Then I removed the MC and pushrod from the booster. Measured the pushrod with a digital caliper and reduced the total length by the feeler gauge measurement plus the additional specified clearance, again I think it was ~0.040”.

Steve

5/4/2011:53 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...