Reply to "Front brake rotors?? Has anyone found a set?"

lf-tp2511Member

Critical to this discussion. Early 65-67 mustang rotors are thinner than the later mustang rotors.

The Wilwood rotor at summit is .94 inches thick. I invite you to try to fit that inside a stock Pantera caliper. Can’t be done.

also critical is the fact that catalog photographs of brake rotors are often generic or outdated.

we have been down this Mustang rotor road so many times before it really is getting a bit old. Please read the previous threads and comprehend that there are differences in thicknesses

there are only a few manufacturing facilities for aftermarket brake rotors. They have moved away from the two-part assemblies to a single piece cast hub and rotor.

As was previously shared, you may very well be able to ream out the SAE lug nut holes and find a correct metric lug nut,

but you can’t fit a thick rotor where only a thin rotor will fit

mild rant finished. 😉

Larry

1/27/2211:37 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...