Ok Ok Now * I Have Trunk Envy * and a new life goal.🔥🤣🤣
Thank Steve but no help.
I scoured pic and this is as close to what I need as * can find.
I need to see the main harness passthrough area. I used the top of the 2 oval cutouts to run the main harness through.
The arrow in the picture shows the area I am hopeful will help me, it also shows the relay section of that harness laying (below it's holder) nicely against the inside of that panel .
I guess I need to try and shift the harness over to the right by a 10" . Seems like it will create a lot of slack on the right corner.