Ron,
I need the length of the front hub from the flat surface where the wheel meets the rotor (wheel studs sticking out), to the end of the dust cap. This measurement will ensure the center section of the wheel will come out further than the dustcap so that a center cap can cover the hole.
I also need the diameter across that hub at the base (where the it meets the mounting surface). This measurement is to ensure the wheel will ride on the hub (making the wheel 'hub centric'), and not on the wheel studs.
Thanks.
Michael
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.