Reply to "Front Trunk Recarpet"

The Weldwood Indoor/outdoor Carpet Adhesive, is what you want.

It holds whatever you use very tight and as a result makes it easier, not easy, but easier to fit the individual pieces together and trim them since they don't slide around.

There are all kinds of material available but the material you want is thicker. It is about 1/4" thick.

It is much thicker than speaker enclosure material.

The best material for this is the boat, or marine carpet.

It is half way between felt and real carpet. It is cheap too.

I don't remember how many pieces I had to cut for the front, but the rear needs to be done in 5 pieces.

The "firewall/bulkhead, the wheel arches (2) and the floor. That's four I count for the front.

In the back it is the two wheel arches, the front and rear bulkheads, then the floor.

This material does not stretch so that is really the only way you can do it.

The floor is the last to go in and it sort of fits like a floor mat, but cut tight to the intersections.