Reply to "Fuel Gauge replacement"

hitchman (Guest)

I replaced my guage with a white vdo and had to change the sending unit.Its very simple to replace,it only screws into the top of the tank.The only problem is that you have to remove the side window to replace it.The side window comes out by pushing it from the back side out.Their are 3 wires hooked to the factory guage at the sending unit,you only use the ground and main guage register wire.The 3rd wire is the low fuel light warning wire and is not used on the replacement vdo guage.I might suggest that if you go this route,while you have the window out,replace the fuel valve on the top of the tank with the rollover type with the check valve built in.

------------------

10/14/015:46 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...