Reply to "Fuse Block Replacement"

Julian,
I heard about the tire problem on the way home from Vegas.

Lucas, over loaded many of their fuses. That is why there are so many 30 amp fuses used. One can load balance or use more fuses to eliminate many of the problems. If you look at the stock block you will see many wires going to the same terminal/fuse. So splitting them offers some safety.

I did a simliar mod but used some of the nesting fuse block available from painless wiring. They have 5 fuses per block and the blocks snap together to build the necessary fuse system. The tough part is jumpering the wires from the old box to the new box.

Also if you are in their playing around, I highly suggest the relay mod for the fans and headlights. There is a great diagram from Mike Drew on the mod: www.panteraplace.com/page109.htm For the cost of a few fuses and common relays it removes a massive load of the switches in the car.

I am good with wiring systems so if you want ideas or a hand drop a call.