fuse panel

Guest

DEAR BOSS WRENCH
I have fixed all the fuses and now I am running down all my problems with lights such as bad grounds and the like. I want to thank you and everybody on this site. You provide a invaluable serivce and need to be commended. I have a question on how the brake light sensors work? I have taken the splitter where the brake lines go into apart and cleaned it and replaced the 2 sensors in it and also had it repaired by a shop [it was cracked and had been some time]. So I had it repaired while I had it apart. I made sure that nothing got warped by heat and test fit the part that slides back and forth when pressure is lost to one side or the other. Every thing seemed o.k.It was not sticking on anything,I also have power to one side of both sensors. Is there an aftermarket setup for this. The original part is 200.00 to 300.00 for it and I was looking for a better system and maybe less money. I am joining P I asap because of this service you provide. thanks ....PAUL

8/27/011:18 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...