Reply to "Gas Pedal - Brake Pedal too close"

LeMans850iMember

@panteradoug the pedal I got was definitely carved out of a billet… to get 6061-T6 pliable is doable but the grain dictates what you can do…

regardless… the part that had the wrong angle for me was it was tilted left side down .. The part you step on was not parallel to the firewall, but angled into the corner of tunnel and firewall.. this may been correct for the seat being in the original position, 1.5” + more to the left, manipulating the pedal from an angle…

The gas pedal I have now plus pulling the kick panel to the tunnel with the stud solved my problem… No touching the brake pedal by accident…

I could have gone even further if I extended the Nippel that connects the gas cable or machine some material of the right side of the pivot point off the gas pedal. There is quite some room to move the kick panel to the right… I probably have another 3/4” from where I am..

2/16/252:12 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...