Mike Thomas just wrote an article doing the rotor swap for (I believe the most recent) POCA magazine and here's the parts list...he says they fit great? Maybe you used a different part? Sorry the ones on SSBC site that Mike used are slotted and vented...not drilled.
Below is the link:
http://www.ssbrakes.com/products/detail/3914/?make=Ford...ar=(1967%20-%201967)
http://www.ssbrakes.com
SSBC Rotors: (1) S2300L (Left) and (1) S2300R (Right) $85.00 per rotor
SSBC Dust Caps: (2) to fit the S2300
Bearings: (2) NAPA BR2
(2) NAPA BR6
Seals: (2) NAPA 17387
Grease: for disc brakes (higher temp resistance)
Bearing packing tool
New cotter pins (2)
If any one wants the entire article I can post it or email it...it's a two page Word document.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.