Hi All! Larry probably has the best plan but here is a comparison between Mangusta and Pantera fuse blocks showing where the differences are. The top two rows of connectors are identical; it's the third (i.e., 'bottom') layer where things diverge. Re. conversion, altering the bus bar setup is probably to biggest hurdle, imo, and of course fastening things down reliably is a major concern once rivets are drilled out to move parts around. No place for questionable contacts!!
The Mangusta block is in front in both images.....this one is from one of the cars that burned several years ago (bought is as scrap parts with the wiring harness). I was amazed the block survived this well, the relays and associated wires nearby turned into a smelly glob. Regards, Nate
