With stuck pistons in calipers that disassemble, I've had good luck by tapping the piston IN a little, then using air or hydraulic force to move it back out, alternating that until the piston finally moves freely. Most sticking is from bore varnish made from water, air & old brake fluid. It removes with hand-held Scotchbrite, not motorized which will machine things and ruin precision parts.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.