Reply to "Goose 8MA642 Refurb and Repaint"

muttsjetMember

Now have pass front end (brake, ball joints, tierod) pulled apart for refurb and new parts, and am comparing it to my completed drv side.

If I wanted to start from scratch on front wheel alignment, is their an initial factory number of turns (my drv side was 18 turns) for the heim connected to the rack? Additionally, my drvs side tie rod was 57mm from outside edge of tightening nut to center of tierod joint (the pass side is 69mm). What is an initial setup parameter for the tierods?

Once rebuild complete, I'll perform a manual home alignment and then take car to the shop for an accurate alignment.

9/6/248:40 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...