quote:Originally posted by George P:
Dennis, that's nice, how high does it lift the car?
That set-up leaves the middle "open" which is where you need to work.
An old man who gets winded jacking a car wants to know!
Hi George,
Here are the dimensions. For the Pantera the jacking points in the front are closer to the ground than those at the rear, so I used the shorter blocks at the front jack points (dimension C) and the taller blocks at the back lift point (dimension D). The car is stable and level this way, but the back end cantilevers a bit because the Pantera lift points are so far forward of the rear axles. I will set jack stands as backup all around regardless before crawling underneath. You can never be too careful working under cars.
